718

Cayenne

2017-2018 Cayenne – Manual

2017-2018 Cayenne – Manual

Go to Exterior    |    Go to Interior    |    Go to PCM

Page: 166

Activating the turn signals

  • Push the lever past pressure point 1 or 2.
    The turn signal remains active until the lever is returned to the home position either manually or automatically when the steering wheel is turned.
  • Push the lever once to pressure point 1 or 2.
    The turn signals flash three times.

Activating the high beam

Switching high beam on and off (vehicles without high beam assistant)

  • Switch on: Press the lever once to pressure point 3.
    The light indicatorlights up.
  • Switch off: Press the lever once to pressure point 4.

Activating and deactivating the high beam assistant (on vehicles WITH high beam assistant)
The following conditions must be fulfilled before the high beam assistant can be activated:

  1. Darkness
  2. The light switch setting is selected.
  3. The speed is over approx. 37 mph (60 km/h).
  4. High beam assistant is activated on the multifunction display.
  1. Please see chapter "Activating and deactivating the high beam assistant (on vehicles WITH high beam assistant)" on page 166.
  • Activation: Press the lever once to pressure point 3.
    The light indicator lights up. The lights automatically switch from low beam to high beam.
    If high beam is on, the light indicator lights up.
  • Deactivation: Press the lever once to pressure point 4.
    The high beam assistant can only be deactivated if the light indicator lights up.

Switching the high beam assistant on/off manually (on vehicles WITH high beam assistant)
The following prerequisites must be fulfilled:
If the high beam assistant has been deactivated or if the conditions for the high beam assistant are not fulfilled, high beam can be switched on and off manually.

  1. Darkness
  2. The light switch settingis selected.
  • Switch on: Press the lever twice to pressure point 3.
    The light indicator lights up.
  • Switch off: Press the lever once to pressure point 4.

Activating the flasher

  • Press the lever once to pressure point 4.
    Light indicatorlights up briefly.

Switching the parking light on and off

  1. The ignition is switched off.
  • Press the lever past upper 2 or lower 1 pressure point to switch on the right or left parking light.

If the parking light is on, a message will appear on the multifunction display after the ignition is switched off and the door is opened.

  1. Please see chapter "Warning and Information Messages" on page 352.


Switching the emergency flasher on and off

Fig 136: Emergency flasher switch in the center console

The emergency flasher also works when the ignition is switched off.

Switching the emergency flasher on and off

  • Press the emergency flasher switch in the center console.
    All turn signals and the light indicator in the button flash.
Quick Index
View all Videos 

Models