718

Cayenne

2017-2018 718 Boxster – Manual

2017-2018 718 Boxster – Manual

Go to Exterior    |    Go to Interior    |    Go to PCM

Page: 37

Setting and changing the desired speed

  1. Adaptive cruise control on.
  2. Vehicle moving.
  3. No stationary objects detected ahead.

Setting the desired speed

  1. Press the control lever on the steering wheel forward (Fig. 2 on page 35, 1).
    The current driving speed is stored as the desired speed, which will be maintained automatically (within the control range of approx. 20 to 130 mph (30 to 210 km/h), and appears orange in status display B.
    The red triangle G under the bar display for the speed control range indicates the speed of the driver’s vehicle.
  2. Release the accelerator pedal.
    The desired speed is automatically maintained provided that a slower vehicle is not detected up ahead.

Information
If your vehicle is stopped and you press the control lever forward (position 1), a message that ACC cannot be activated when parked appears on the multifunction display.

A message also appears on the multifunction display if a stationary object has been detected ahead.


Increasing the desired speed

  • Briefly press the control lever on the steering wheel forward (Fig. 2 on page 35, position 1).
    The desired speed setting is increased in increments of 1 mph or 1 km/h.
    – or –
    Hold the control lever on the steering wheel forward (setting 1).
    The desired speed setting is increased in increments of 5 mph or 10 km/h.
    Status display B indicates the new desired speed.
    The red triangle G under the bar display for the speed control range indicates the speed of the driver's vehicle.

Reducing the desired speed

  • Briefly pull the control lever on the steering wheel toward the steering wheel (Fig. 2 on page 35, position 2).
    The desired speed setting is reduced in increments of 1 mph or 1 km/h.
    – or –
    Pull and hold the control lever on the steering wheel toward the steering wheel (setting 2).
    The desired speed setting is reduced in increments of 5 mph or 10 km/h.
    Status display B indicates the new desired speed.
    The red triangle G under the bar display for the speed control range indicates the speed of the driver’s vehicle.


Setting the desired distance

The desired distance from the vehicle ahead can be set in four stages.

Fig. 4: Setting the desired distance

Information
When the desired distance is set, the "ACC" main menu appears temporarily on the multifunction display.

Press switch Z to display the "ACC" main menu without changing the desired distance.


Information
The distance depends on the driving speed. It reduces as the vehicle slows down and increases as it speeds up.


Quick Index
View all Videos 

Models