You cannot activate the voice control system while you are on a telephone call.
Switch on the ignition and the PCM.
Press the button on the lever for direction indicators, high beam, and headlight flasher.
An audible signal sounds after a short time, the voice control system is activated and awaits a spoken command. If you do not say a command, the voice control system prompts you to say something with the announcement "Could you repeat that?".
As soon as the voice control system is activated, you will see one of the following two symbols in the top right corner of the display:
– = The voice control system is awaiting a spoken command.
– = The voice control system is currently making an announcement.
Deactivating voice control
You can deactivate the voice control system as follows:
Press the button on the lever for direction indicators, high beam, and headlight flasher. - or -
Say the "cancel" or "end" command if the voice control system is awaiting a command.
After you deactivate the system, you hear the announcement "End" in confirmation and the voice control system then switches off.
Setting the volume
You can change the volume of the voice control system announcements to compensate for changes in the ambient noise during the journey, for example.
Activate the voice control system and say a command such as "help", for example.
Turn the volume control on your device during an announcement to raise or lower the volume of the announcement.
The volume of the voice control system announcements is independent of that of the telephone and audio system.
Setting the language
The voice control system recognizes various languages. When you change the language, it affects the voice input by the user, the voice output by the PCM, and the language shown on the display.