Manual: 2012 -
Failure to Use Safety Belts
Safety belts cannot protect the body if they are not fastened. Improperly worn safety belts increase the risk of injury in the event of an accident.
Always make sure your and your passengers' safety belts are properly fastened when seated in the vehicle.
- For your and your passengers' protection, use safety belts at all times while the vehicle is in motion.
- Use appropriate child restraint systems for all small children.
- Safety belts must be positioned on the body as to restrain the upper body and lap from sliding forward. Improperly positioned safety belts can cause serious personal injury in case of an accident.
- The shoulder belt should always rest on your upper body. The shoulder belt should never be worn behind your back or under your arm.
- For maximum effectiveness, the lap belt should be worn low across the hips.
- Pregnant women should position the belt as low as possible across the pelvis. Make sure it is not pressing against the abdomen.
- Belts should not be worn twisted.
- Do not wear belts over rigid or breakable objects in or on your clothing, such as eye glasses, pens, keys, etc. as these may cause injury.
- Several layers of heavy clothing may interfere with proper positioning of belts.
- Belts must not rub against sharp objects or damage may occur to the belt.
- Two occupants must never share the same belt at the same time.
Using Damaged Safety Belts
Damaged, heavily stressed or worn safety belts cannot protect the body sufficiently in the event of an accident.
- Keep belt buckles free of any obstruction that may prevent a secure locking.
- Belts that have been subjected to excessive stretch forces in an accident must be inspected or replaced to ensure their continued effectiveness in restraining you.
The same applies to belt tensioner systems which have been triggered. In addition, the anchor points of the belts should be checked.
- If safety belts do not work properly, see your authorized Porsche dealer immediately.
- If the belts show damage to webbing, bindings, buckles or retractors, they should be replaced to ensure safe operation.
- Do not modify or disassemble the safety belts in your vehicle.
- The belts must be kept clean or the retractors may not work properly.
Please see the chapter "CLEANING THE SAFETY BELTS" on page 217.
- Never bleach or dye safety belts.
- Do not allow safety belts to retract until they are completely dry after cleaning or this may cause damage to the belt.