Choose different model
Back to 2013/2014 911

Manual: 2013/2014 911

Page: 161

The events below inform the driver of PSM control operations and warn him to adapt his driving style to the road conditions:
– PSM warning light on the instrument panel flashes.
– Hydraulic noises can be heard.
– The vehicle decelerates and steering-wheel forces are altered as PSM controls the brakes.
– Reduced engine power.
– The brake pedal pulsates and its position is changed during braking.
In order to achieve full vehicle deceleration, foot pressure must be increased after the brake pedal has begun vibrating.

Examples of PSM control operations
– If the "front wheels of the vehicle drift" on a bend, the engine power is reduced and the rear wheel on the inside of
the bend is braked if necessary.
– If the rear of the vehicle swings out on a bend, the front wheel on the outside of the bend is braked.
– Brake system prefilling:
The brake system is prepared for possible subsequent emergency braking if the accelerator pedal is released suddenly
and quickly. The brake system is prefilled and the brake pads are already applied gently to the brake disks.
– Brake booster (Hydraulic Brake Assist):
In the event of an emergency braking operation where the pedal force is insufficient, a brake booster provides the
braking pressure necessary for maximum deceleration at all 4 wheels.

Combined operation of PSM and PTV Plus
In order to ensure optimum stabilization of the vehicle, the center differential lock is influenced when PSM interventions occur on vehicles with PTV Plus.

Automatic brake differential (ABD)
The ABD system controls the front and rear axles separately. If one wheel of an axle starts to spin, it is braked so that the other wheel on the same axle can be driven.

ABD recognizes different driving states, and it features control strategies adapted to these states. In situations in which little propulsive power is required, such as when the vehicle moves off on a level gravel surface, traction control already becomes active at low engine speeds. If a large amount of propulsive power is required, e.g. when driving off on an uphill slope or for rapid acceleration, the ABD system is adapted accordingly.

Anti-slip control (ASR)
The anti-slip control system prevents the wheels from spinning by adjusting the engine power, thereby ensuring good lane-holding ability and stable handling.

Engine drag torque control (MSR)
In conditions of excessive slip, the engine drag torque control system prevents all driven wheels from locking up when the vehicle is overrunning. This is also the case for downshifts on a slippery road.

Steering torque pulse
The steering torque pulse provides the driver with steering assistance when braking on road surfaces with differing friction values.

Additional steering forces also assist the driver during countersteering.

Choose different model
Back to 2013/2014 911