Manual: 2013/2014 911

Page: 46

External audio source

You can connect an external audio source that is operated on the source itself rather than on the PCM to the AUX interface of the PCM.

Accident hazard. The distraction could result in you losing control of the vehicle.

  • Operate the external audio source only if you are safely in control of your vehicle and when the traffic conditions permit. If in doubt, stop the car and operate the PCM while the vehicle is parked.

Calling up the main menu for the external source

  • Keep pressing the button until the "AUX" audio source is highlighted in the bottom line.

In order that a connected external audio source can be selected by the button, the interface in the SET menu must be activated.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET DISC / AUX".
    You will only be able to access the "SET DISC / AUX" menu if there is at least one CD/DVD inserted or at least one audio source activated ( ) in the menu.
  4. Select "AUX" to activate ( ) or deactivate ( ) the function.

The external audio source cannot be operated on the PCM, it can only be operated on the device itself. Please consult the operating instructions for the respective device to find out how to do this.

Volume control should mainly be performed on the external audio source to avoid large differences in volume (particularly increases) when changing the audio source.
Recommendation:

  • Set the maximum volume on the external audio source.
  • Then set the desired volume on the PCM.