Making personal settings

Selecting the audio source

By pressing the button, you open a window where you can set the current audio source.
The window closes again:
– once you have selected an audio source,
– if a few seconds pass without any input from you.

1. Press the button.
2. Select the desired audio source on the display.

Always displaying all audio sources in the window
The audio sources "iPod" and "USB" are only displayed if there is a corresponding device connected to the interface. If both of these audio sources are always to be displayed (even if there is no device connected to the PCM), you must activate their display in the SET menu.
You can also activate or deactivate the audio source "AUX" (external audio source) in the SET menu.

1. Press the button.
2. Press the button or touch the tab of the same name in the header.
3. Select "SET DISC / AUX".
   You will only be able to access the "SET DISC / AUX" menu if there is at least one CD/DVD inserted or at least one audio source activated ( ) in the menu.
4. Select the appropriate audio source to activate ( ) or deactivate ( ) its display.

Configuring the PCM display

You can set various units, the date and time, the welcome display as well as the operating language of the PCM in the "Regional settings" menu.

Setting the language

1. Press the button.
2. Press the button or touch the tab of the same name in the header.
3. Select "SET PCM system"
   > "Regional settings"
   > "Language".
4. Select the desired language.

Setting the date (can only be set if the PCM is not equipped with a navigation system)

1. Press the button.
2. Press the button or touch the tab of the same name in the header.
3. Select "SET PCM system"
   > "Date & time"
   > "Date".
4. Set the date by selecting the corresponding numerical fields.