Manual: 2013/2014 911

Page: 119

Defining the reference lap

If no reference lap is defined in advance, the first lap in a recording is automatically used as the reference lap.
Furthermore, any lap already recorded can be defined as the reference lap for the next recording.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Sport display"
    > "Recordings".
    A list of the stored recordings is opened.
    The reference laps are indicated in the list using the icon.
  4. Select the desired reference lap.
  5. Select "Set reference".
    The chosen reference lap is used for future recordings.

Resetting the defined reference lap

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Sport display"
    > "Reset reference".
    The previously defined reference lap is reset. If no new reference lap is defined, the first lap is used again as the reference lap for any further recordings.

Renaming the reference lap

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Sport display"
    > "Recordings".
    A list of the stored recordings is opened.
  4. Select the desired reference lap.
  5. Select "Rename".
    The input menu is opened.
  6. Enter the desired name and confirm by selecting "OK".
    The name of the reference lap is now changed.

Deleting the reference lap

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Sport display"
    > "Recordings".
    A list of the stored recordings is opened.
  4. Select the desired reference lap.
  5. Select "Delete".
  6. Confirm by selecting "Yes".
    The recording is now deleted.

Transferring data

  1. Press the button.
  2. Select .
  3. Select "Sport display"
    > "Recordings".
    A list of the stored recordings is opened.