Quick Search: Choose Model and Year, then enter search topic.
The warning message "Alternator fault" will appear on the multi-function display in the instrument panel if the vehicle electrical system voltage drops significantly.
For information on warning messages on the multi-function display:
– Defect in the battery charging system
– Broken drive belt
Risk of engine damage.
The engine cooling does not function if the drive belt is torn.
Check Engine (Emission Control)
The emission control system detects malfunctions that could cause increased pollutant emissions or consequential damage etc. well in advance.
Faults are indicated by the warning light on the instrument panel which then either lights up continuously or flashes.
The faults are recorded in the control unit's fault memory.
The warning light on the instrument panel lights up when the ignition is switched on as a lamp check and goes out approx. 1 second after the engine starts.
The warning light on the instrument panel flashes to indicate operating states (e.g. engine misfiring) which may cause damage to certain parts of the emission control system.
In order to avoid consequential damage to the engine or the exhaust-gas cleaning system (e.g. catalytic converter):
Risk of damage to the emission control system.
If the warning light on the instrument panel continues flashing even when you have eased off the accelerator pedal, the emission control system may overheat.
A speaker in the instrument panel generates acoustic signals.
The warning message "Fault sound output instrument cluster – ParkAssist" will appear on the multi-function display in the instrument panel if a speaker fault occurs.
The speaker cannot generate acoustic signals.