Choose different model
Back to 2011/2012 Cayman

Manual: 2011/2012 Cayman

Page: 261

Pulling vehicle onto flat bed

  1. Position wooden ramps at the base of the flat bed to reduce the angle of the pull.
  2. Reel in the hoist cable and check the underside of the vehicle for any interference.

Tieing down vehicle on flat bed

  1. Carefully feed towing straps through the opening in the rear wheels.
    Make sure metal parts of straps do not damage rim.
    Make sure the strap is flat over the rim bead.
    Make sure brake backing plate is not damaged.
  2. Secure straps to rear of flat bed.
  3. Reel in hoist cable only far enough to tension tie-down straps.
  4. Carefully feed towing straps through the opening in the front wheels.
    Make sure metal parts of straps do not damage rim.
    Make sure the strap is flat over the rim bead.
    Make sure brake backing plate is not damaged.
  5. Secure straps to front of flat bed.
  6. Release tension on hoist cable, but do not disconnect.
    Use hoist cable as a safety cable.
Choose different model
Back to 2011/2012 Cayman