The original equipment tires and wheel rims on your Porsche comply with all applicable Federal Motor Vehicle Safety Standards.
For your safety remember the following:
–Wheel rims and wheel bolts are matched to fit your Porsche.
– If you intend to use other than original equipment wheels, be sure that they conform to Porsche specifications for your model.
Only tires with the same make and with the same specification code (e.g. "N0", "N1"...) can be mounted.
– The use of wheel rims and wheel bolts that do not meet specifications of the original factory installed equipment will affect the
safe operation of your vehicle.
– Before you plan on exchanging wheels, or snow tires already mounted on the wheel rims, consult your authorized
Porsche dealer. Your dealer has the technical information necessary to advise you which wheel rims and wheel
bolts are compatible with the original factory installations.
Risk of loss of control and serious personal injury or death.
Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
All passenger car tires must conform to Federal Safety Requirements in addition to these grades.
The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specific government test course.
For example, a tire graded 150 would wear one and a half (1-1/2) times as well on the government
course as a tire graded 100.