A roll-up sunblind is integrated in the Panorama roof system and can be adjusted by actuating the rocker switch in the roof console.
Opening/closing roll-up sunblind
The rocker switch has a two-stage function:
To open the roll-up sunblind:
To close the roll-up sunblind:
Memory function while closing
The roof and roll-up sunblind cannot be closed at the same time.
– If the rocker switch is pressed to the second stage (one-touch operation) while closing the roof, the roll-up sunblind closes
to its end position after the roof has reached its end position.
– If the roof is closed (one-touch operation) while closing the roll-up sunblind, the closing movement of the roll-up sunblind
will be interrupted. The roll-up sunblind closes to its end position after the roof has reached its end position.
Automatic opening of roll-up sunblind
If the roof is opened while the roll-up sunblind is closed, the roll-up sunblind also opens automatically.
– When the roof is opened in the vehicle's longitudinal direction, the roll-up sunblind also opens automatically.
– When the roof is opened in the tilt position, the roll-up sunblind also opens automatically by approx. 10 cm
When the roof is in tilt position, the roll-up sunblind can only be closed as far as ventilation position.
Storing end position of the roll-up sunblind
The end positions of the roll-up sunblind are lost if the vehicle battery is disconnected/reconnected or flat, after emergency starting with jumper cables, if the electrical fuse for the roll-up sunblind is replaced or after emergency operation.
The end position of the Panorama roof system may also have to be stored.
For information on storing the end position of the Panorama roof system:
Rollup Sun Blind Operation
When storing the end position, the force limiter is not available and the roll-up sunblind will close with full force.