Manual: 2011/2012 Boxster

Page: 155

Deactivating voice control

You can deactivate the voice control system as follows:

  • Press the button on the Operating Lever for onboard computer (sports car) or on the stalk for the turn signal, high beam, and headlamp flasher (Cayenne).
    - or -
  • Say the "stop", "quit", "terminate", "end", or "cancel" commands if the voice control system is awaiting a command.

After you deactivate the system, you hear the announcement "End" in confirmation and the voice control system then switches off.

Setting the volume

You can change the volume of the voice control system announcements to compensate for changes in the ambient noise during the journey, for example.

  1. Activate the voice control system and say a command such as "help", for example.
  2. Turn the volume control on your device during an announcement to raise or lower the volume of the announcement.

The volume of the voice control system announcements is independent of that of the telephone and audio system.

Setting the language

The voice control system recognizes various languages. When you change the language, it affects the voice input by the user, the voice output by the PCM, and the language shown on the display.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET PCM system"
    > "Regional settings"
    > "Language".
  4. Select the desired language.
    The corresponding language is set.

Configuring the voice control system

You can configure how you interact with the voice control system in just a few steps.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET PCM system"
    > "Voice control".