Brake pads and brake discs
The high-performance brake system is designed for optimal braking effect at all speeds and temperatures.
Certain speeds, braking forces and ambient conditions (such as temperature and humidity) therefore might cause "brake noises".
New brake pads or linings
The slightly reduced braking ability must be compensated for by pressing the brake pedal harder. This also applies whenever the brake pads and brake discs are replaced.
ABS Brake System (Antilock Brake System)
With the ABS system in your vehicle, the following areas are enhanced:
Good directional control, no swerving caused by locking of wheels under braking conditions.
Shorter stopping distance, stopping distances are usually reduced because controlled braking is maximized.
Prevention of wheel lock up, no brake- induced sliding and thus no localized tire wear from emergency braking.
The crucial advantage of the ABS system over a conventional brake system is in the area of maintaining directional control and maneuverability of the car in emergency situations.
Inappropriate Driving Style and Speed
The risk of accidents due to inappropriate speed cannot be reduced, even by the ABS.
The driver bears the responsibility for all driving maneuvers.
Other vehicles not equipped with the ABS system may not be able to maintain control, especially on wet or poor road surfaces and thus may be more likely to impact you from behind.
Operation of the ABS system
If braking forces approach the wheel lock-up point for all wheels (panic braking) the ABS system will intervene to provide a rapid rythmic braking. The proper operation of ABS is perceived by the driver as a pulsating brake pedal in conjunction with audible noise and perhaps some vibration.
The functional readiness of all the main electrical components of the ABS is checked by an electronic monitoring system both before and while you drive.