Manual: 2011/2012 Boxster

Page: 28

  • Cancel automatic adjustment by pressing any of the seat adjustment buttons.
  • Do not leave children in the vehicle unattended, since they may depress the buttons and crush themselves or another occupant.

Operation with person buttons 2, 3
Storing seat position

  1. Switch on ignition.
    Reverse gear must not be engaged.
  2. Set the desired seat and door-mirror positions.
  3. Keep memory button M depressed and also press person button 2 or 3 until an audible signal confirms that the position has been stored.
    The individual setting is now stored under the desired person button.

Recalling seat position
The seat position can only be called up when the vehicle is stationary.

  1. Switch on the ignition or
    open the driver's door.
  2. Press person button until the seat has reached its final position.
    The setting of door mirrors and lumbar support will be completed even if the person button is not kept depressed.

Information
Automatic seat adjustment can be interrupted immediately by releasing the button.


Operating with the remote control of the vehicle key
Each remote control (up to six) can be assigned an individual seat and door mirror position.

The stored seat and door mirror position is set automatically when the vehicle is unlocked using the corresponding remote control.

Storing seat position

  1. Switch the ignition on with the desired car key.
    Reverse gear must not be engaged.
  2. Set the desired seat and door-mirror positions.
  3. Keep memory button M depressed and also press key button 1 until an audible signal confirms that the position has been stored.
    The individual setting is now assigned to this remote control and to the key button.
    It is necessary to wait for at least 15 seconds between locking and unlocking the door.

Storing individual lowered position of the passenger's door mirror as a parking aid
Once the driver's seat setting has been stored, an individual lowered position of the passenger's door mirror may be stored for driving in reverse:

  1. Apply the handbrake.
  2. Switch the ignition on with the desired car key.
  3. Engage reverse gear.
  4. Select passenger side with mirror switch.
    The passenger's mirror swivels downwards.
  5. Set passenger's door mirror to desired final position.
  6. Keep memory button M depressed and also press key button 1 until an audible signal confirms that the position has been stored.
    The individual setting is now assigned to this remote control and to the key button.

Recalling seat position

  • Unlock the locked vehicle or the luggage compartment with the remote control.
    The stored seat position is automatically set.

The seat position assigned to a remote control can also be recalled with the key button 1 if the corresponding key was used to switch on the ignition.

If no seat position has been assigned to a remote control, the key button will not work.

Information
Automatic seat adjustment can be interrupted immediately:

  • by switching on the ignition,
  • by pressing the central locking button,
  • by pressing any memory or seat adjustment button.

Clearing the stored seat position

  1. Switch the ignition on with the desired car key.
  2. Press memory button twice and key button 1 once consecutively.