Lights, Replacing Bulbs
The tachometer shows the engine speed in revolutions per minute (rpm).
Headlight High Voltage Hazard
The headlights are under high voltage when installed.
- Exercise extreme care when working close to the headlights.
Risk of short circuit.
- Always switch off the relevant consumer when changing bulbs.
Risk of damage.
Bulbs of a higher wattage can damage the lamp housing.
- Only the bulbs shown in the chart may be used.
- New bulbs must be clean and free from oil, grease and fingerprints. Therefore, never touch bulbs with your bare hands.
Use a cloth or soft paper while replacing bulbs.