A - Adjustment button for clock
B - Clock
C - Outside temperature display

Clock
The clock is blanked out approximately four minutes after the ignition is switched off or when the car is locked.

Setting the time

Reaching Through Steering Wheel Spokes

You may lose control of the vehicle.

• Do not reach through the steering-wheel spokes when driving since your arm can be trapped and block the turning of the steering wheel.

• Switch ignition on.

Setting hours

• Press adjustment button A for about one second.
  Hour display flashes.
• Turn button in the appropriate direction:
  to right – increase hours figure
  to left – decrease hours figure.
  
  Adjustment in hours – turn button briefly
  Fast adjustment (display cycles) –
  turn and hold button.

Setting minutes

• Press adjustment button again.
  Minutes display flashes.
• Set by rotating as in hours mode.

Leaving adjustment mode
Automatically after one minute or:

• Press adjustment button again.

When adjustment mode is deliberately left by pressing the button, the time begins precisely to the second.

Information
The time mode can be changed between 12h and 24h in the on-board computer.

Outside Temperature
The outside temperature display C does not indicate, if ice is on the road.

Even if a temperature above 32 °F (0 °C) is displayed, ice may still form on the road, for instance on bridges or when the road passes through a heavily shaded area.

Battery

If the battery voltage drops abruptly, a warning message will be displayed by the on-board computer.

If the warning is displayed by the on-board computer while the engine is running or while driving:

• Stop the car in a safe place and stop the engine.

Possible causes
– Defect in the battery charging system.
– Broken drive belt.

Broken Drive Belt

A broken drive belt means there is no power assistance to the steering (more effort is required to steer) and engine cooling fails.

• Do not continue driving.
• Have the fault remedied at the nearest authorized Porsche dealer.