2009-2012 Boxster – Manual

2009-2012 Boxster – Manual

Page: 29

Choosing channels from the channel list and tuning to them
The channel list contains the channels from various categories that can currently be received. It is sorted by channel numbers and in addition to the channel names, also contains the categories to which the channels belong.

The satellite radio channels are divided into various categories. These categories allow the channels to be divided into genres such as "Decades", "Rock", or "Sports".
By selecting specific categories, you can determine the composition of the channel list yourself and make the list easier to search.
To find out more about selecting individual categories, please refer to the section "Selecting categories for the music search" on page 30.

  1. Set "SAT" mode.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Channel list".
    The channel list is opened. The channel currently tuned to is highlighted in color.
  4. Select the desired channel.

Storing channels on the station buttons in the preset memories

In each of the following preset memories there are six memory locations available where you can store stations:
SAT 1, SAT 2, SAT 3 and MIXED.

In contrast to all other preset memories, in the MIXED preset memory you can store stations and channels in different modes. This means you can store stations from FM mode and AM mode as well as channels from SAT mode here.

  1. Select "Preset memory".
    The available preset memories are listed.
  2. Select the desired preset memory.

Manually storing channels

  1. Set "SAT" mode.
  2. Tune to the channel.
  3. Set the preset memory if applicable.
  4. Press and hold the station button for a few seconds.
    As soon as the channel is stored on the station button, the name of the channel is displayed on the button.

Storing channels from the channel list

  1. Set "SAT" mode.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Channel list".
  4. Select the desired channel by holding it for a few seconds.
    The station buttons are displayed and the channel previously selected is shown in the information window.
  5. Select a station button to store the channel on it.
Quick Index
View all Videos