Fit headlight housing from underneath at an angle and then swivel it upward.
Screw in both screws.
Check operation of the headlight.
Changing bulb for side marker light
Remove the cap in the wheel housing liner with a screwdriver.
Insert the screwdriver into the opening in the wheel housing liner parallel to the side marker housing (in direction of travel).
By pressing with the screwdriver, disengage the securing spring of the side marker housing.
Remove side marker and undo bulb holder (bayonet lock).
Remove the bulb from the holder and replace it. Insert holder.
Check operation of the light.
Insert the side marker's retaining lugs A into the side section at the front.
Push in side marker until the securing spring B is felt to engage.