Choose different model
Back to 2009-2011

Manual: 2009-2011

Page: 231

Lights, Replacing Bulbs

Headlight High Voltage Hazard

The headlights are under high voltage when installed.

  • Exercise extreme care when working close to the headlights.

Risk of short circuit.

  • Always switch off the relevant consumer when changing bulbs.

Risk of damage.

Bulbs of a higher wattage can damage the lamp housing.

  • Only the bulbs shown in the chart may be used.

  • New bulbs must be clean and free from oil, grease and fingerprints. Therefore, never touch bulbs with your bare hands.
    Use a cloth or soft paper while replacing bulbs.
Choose different model
Back to 2009-2011