Manual: 2011/2012 911

Page: 90

  1. Select one of the following settings for the call diversion:
    Divert all
    activates call forwarding for all incoming calls.
    Busy
    activates call forwarding for calls that come in while you are on another call.
    To be able to activate call forwarding with the "Busy" setting, the "Call waiting" function must be switched off.
    No answer
    activates call forwarding for calls that you cannot or do not want to accept. The call is forwarded to the entered
    number after a certain time.
    Cannot be reached
    activates call forwarding for calls that come in while the telephone is switched off or is not ready to receive calls.
    Cancel all
    deactivates all call diversions at once. The telephone numbers entered for the individual call diversions remain
    saved in the network and are displayed again the next time call forwarding is activated.
  2. Select "Switch on".
    The input menu is opened.
  3. Enter the desired telephone number for the call diversion and confirm your entry by selecting "OK". - or -
    Select "Phonebook".
    After selecting Phonebook, you can select a number from the phonebook. The call is then diverted to this number.
    To find out more, please refer to the section "Calling a phonebook entry" on page 68.
  4. If you set the "No answer" call diversion type, you also need to set the delay after which the calls are to be diverted.
    Select "Delay".
    Set the desired delay by selecting it in the list that appears.
    The relevant call diversion is then activated and the settings are shown on the display.

Checking the status of the call diversion

  1. Select the desired type of call diversion.
  2. Select "Check status".
    The current status is then queried in the network and shown on the display after a few seconds.

Deactivating call diversion

  1. Select the desired type of call diversion.
  2. Select "Switch off".
    The corresponding call diversion is deactivated.

Switching the "Call waiting" function on and off

If the "Call waiting" function is activated, an incoming call will be indicated during an active call.
The caller hears the dialing tone.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET PHONE"
    > "Call settings"
    > "Call waiting".