Manual: 2011/2012 911

Page: 78

Reading a vCard

  1. Press the button.
  2. Select "Messages".
  3. Open the relevant vCard by selecting it.
  4. Select "All details" to view all of the details in the vCard.

If you save the vCard, the telephone numbers will be displayed in the phonebook and any geographical coordinates will be displayed in the list of personal destinations in the navigation system.

  Saving a vCards

  1. Press the button.
  2. Select "Messages".
  3. Open the relevant vCard by selecting it.
  4. Select "Accept".
  5. Close the message that the data has been accepted by selecting "OK".

Discarding a vCard

  1. Press the button.
  2. Select "Messages".
  3. Open the relevant vCard by selecting it.
  4. Select "Discard".
    The vCard is closed and no longer displayed in the list of received messages.

Numbers in text messages

If a text message contains telephone numbers or geographical coordinates, you can store these directly in the phonebook or list of personal destinations.

Calling telephone numbers from a text message

  1. Press the button.
  2. Select "Messages".
  3. Open the relevant text message by selecting it.
  4. Select "Extract number".
    A list of the numbers contained in the text message is displayed.
  5. Select the desired number in the list.
  6. Select "Add to number" if applicable and enter the necessary digits.
  7. Select "Call number".
    The call is made.

Storing telephone numbers from a text message (only with the SIM card inserted)

  1. Press the button.
  2. Select "Messages".
  3. Open the relevant text message by selecting it.
  4. Select "Extract number".
    A list of the numbers contained in the text message is displayed.
  5. Select the desired number in the list.
  6. Select "Store number".
  7. Enter the desired details.
    To find out more, please refer to the section "PCM phonebook" on page 68.

Using geographical coordinates for route guidance

  1. Press the button.
  2. Select "Messages".
  3. Select "Extract number".
  4. Open the relevant geographical coordinate by selecting it.
    The map display is opened and the geographical coordinate is shown. To find out more, please also refer to the section "Map display" on page 146.
  5. Select "Start route guidance".
    The route is calculated and route guidance starts.