Manual: 2011/2012 911

Page: 25

Setting the Traffic prog. volume

The traffic program volume refers to the volume at which the traffic program announcements are output.
It specifies the minimum volume as a function of the volume of the currently selected audio source.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Traffic prog.".
  4. Make the desired setting on the scale by selecting the two symbols and .

Making settings for radio mode

Switching RBDS on and off

The PCM is capable of receiving and evaluating RBDS signals (RBDS = Radio Broadcast Data System) in FM mode. It supports the following functions:
– station name,
– program type (PTY),
– traffic program,
– radio text as well as
– detection of alternative frequencies.
(Radio stations transmit programs with the same program content on different frequencies in different regions.)
You can switch tracking of these alternative frequencies on and off in the Set menu.

  1. Keep pressing the button until FM is highlighted.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET FM".
  4. Select "RBDS" to switch the function on ( ) or off ( ).

Switching RDS radio text on and off

  1. Keep pressing the button until FM is highlighted.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET FM".
  4. Select "Radio text" to switch the function on ( ) or off ( ).

Setting sort criteria for the FM station list

The FM station list can be sorted according to different criteria. You can set the sorting as follows:

  1. Keep pressing the button until FM is highlighted.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET FM".
  4. Select "Sorting criteria".
    You can then select various radio buttons:
    Station strength: The station list is displayed sorted according to field strength. Stations with good reception
    are shown at the top of the list.