Choose different model
Back to 2011/2012 911

Manual: 2011/2012 911

Page: 24

  1. Keep pressing the button until the desired mode is highlighted.
  2. Select "Preset memory".
    The available preset memories are listed.
  3. Select the desired preset memory.
  4. Touch the tab in the header again.

Choosing a station in the station list and storing it

  1. Keep pressing the button until "FM" is highlighted.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Station list".
  4. Select the desired station entry by pressing it for a few seconds.
    The station buttons are displayed and the station previously chosen is shown in the information window.
  5. To store the station on a station button, select the desired station button.
    The station list is displayed once more.

Storing via an automatic station search (autostore)
The automatic station search function is only available for the preset memories FM 1, FM 2, FM 3 as well as AM 1 and AM 2.

  1. Keep pressing the button until the desired mode is highlighted.
  2. Set the preset memory if applicable (> page 23).
  3. Select the "Autostore" menu item.
    The search starts. It stores the six stations with the strongest signals and tunes to the one with the strongest signal.

Manually storing stations

  1. Keep pressing the button until the desired mode is highlighted.
  2. Tune to the station (> page 22).
  3. Set the preset memory if applicable (> page 23).
  4. Press and hold the station button for a few seconds.
    As soon as the station is stored on the station button, the station name or the station frequency is displayed on the button and you hear an audible signal.

Traffic program

Various FM radio stations broadcast traffic messages in addition to their radio program.
The broadcasting stations are responsible for the quality of these traffic messages. For that reason, no liability can be accepted for the completeness and correctness of the information.

Traffic messages are part of the RBDS signals and are not available everywhere. To find out more, please refer to the sections "Switching RBDS on and off" on page 25.

Turning the traffic program on

  1. Keep pressing the button until FM is highlighted.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Traffic prog." to switch the function on ( ) or off ( ) .
    When the traffic program is switched on, you will hear the traffic messages regardless of the audio source playing at the time.
Choose different model
Back to 2011/2012 911