Manual: 2011/2012 911

Page: 143

  1. When off-road navigation is switched on, press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Off-road settings".
  4. Select "Recording mode".
  5. Set the desired grid by selecting it.

When off-road navigation is switched on, this function is also available in the menu of the map display after selecting "Record trace".

Tracing a route

You have various options when tracing routes, based on the trace direction ("Trace forwards" and "Trace backwards") and trace point ("From start point" and "From current position"):
– From start point, trace forwards:
You are directed to the start point of the recording and drive the trace from the start point to the end point.
– From start point, trace backwards:
You are directed to the end point of the recording and drive the trace from the end point to the start point.
– From current position, trace forwards:
You are directed to the closest point in the trace and drive the trace in the direction of the end point.
– From current position, trace backwards:
You are directed to the closest point in the trace and drive the trace in the direction of the start point.

After starting navigation, you are navigated to the next navigation point. Route guidance is by means of a compass display with the vehicle symbol in the center of the compass rose.

The orange-colored direction arrow points in the direction of navigation point currently being navigated to. The angular deviation between the current direction of travel and the direction to the next navigation point is shown as an orangecolored segment. The angular deviation is indicated in degrees.

  1. Press the button.
  2. Select "Stored destinations".
    The personal destination memory is opened.
  3. Select the desired trace in the list.
  4. Select "Start route guidance".
    If off-road navigation is not yet activated, the safety notice is displayed.
  5. Confirm the safety notice with "Activate offroad" if applicable to activate off-road navigation.
  6. Select the desired direction of travel and start point along the route to be driven.
    Route guidance is started.