The Sport display (only available for sports cars)
The Sport display is part of the Sport Chrono
Package Plus that also includes a stopwatch and
buttons for dynamic driving settings (Sport mode).
The combination of the stopwatch and PCM allows
lap data to be recorded and evaluated.
The time is recorded by the stopwatch operated
using the on-board computer in the instrument
Please also refer to the chapter "Chrono" in your owner's manual for more information on this.
The graphical display as well as the storage and
evaluation of the recorded lap times and the
associated lap lengths is performed by the PCM.
The following information can be recorded and
displayed for each driven lap:
– the fastest lap time and in comparison the current lap time,
– a comparison of the current lap and the fastest lap so far,
– the portion of the lap already covered, and
– the distance or number of laps possible with the remaining fuel.
The functions of the Sport display can be used for
any route (e.g. trip to work), not just laps.
Any recorded lap/route can be defined as a
reference route. This then forms the comparison
basis for further laps/routes and recorded times.
Laps/routes with lengths deviating from the
reference lap by more than 15 percent (longer or
shorter) are tagged in the evaluation.
Recording starts as soon as you start the
stopwatch in the CHRONO on-board computer
menu. The first lap corresponds to the reference
lap if none has already been loaded. The reference
lap is needed to display the circle diagram and the
remaining laps left in the tank.
You start the recording as well as continue the
individual laps by operating the stopwatch in the
on-board computer menu.
To find out more, please also refer to the
corresponding chapter in the owner's manual.