Manual: 2011/2012 911

Page: 113

Deleting an existing key assignment
You can delete an existing key assignment once more.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).
  4. Select "SET logbook"
    > "Manage lists".
  5. Select the "Driver" list.
  6. Select the desired driver.
  7. Select "Delete key".
  8. Confirm the message by selecting "Yes".
    The assignment is deleted again.

Transferring the logbook data

Depending on the equipment in your PCM, you can either transfer the stored data via the Bluetooth® interface or the USB interface. The data is not deleted during this process.

Please note that the radio connection between the two devices must be activated for data transfer using Bluetooth®. To find out how to activate this radio connection, please refer to the section "Switching Bluetooth on" on page 51.
You will only be able to access the "to USB" transfer method if there is a USB memory stick connected to the USB interface. To find out more about the permissible USB memory media, please refer to the section "Notes on the media supported" on page 42.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Logbook"
    > "Transfer data".

Transferring data via the USB interface

  1. Select "to USB".
    The data is transferred provided there is a storage medium without write protection and with sufficient free memory connected.
    Otherwise you are notified of the problem with the data transfer by means of an error message.

Transferring data via the Bluetooth interface

  1. Select "to Bluetooth".
    A list of the Bluetooth devices currently authorized is opened.
  2. The list of known devices that are suitable for a transfer is displayed. If the desired device is not there, you can search for further devices. To do this, press "New device" (see also the section "Adding a new Bluetooth device" on page 61).
  3. Select the desired device in the list.
    The data is transferred.