Manual: 2011/2012 911

Page: 109

Setting the standard trip for the logbook

You can use the "Standard trip" function to choose the trip type to be set as standard at the start of a journey.
The following trip types are available:
"Business trip",
"Work trip",
"Private trip", and
"Last trip" .
The trip type "Last trip" is only available to you if at least one trip has been recorded.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).
  4. Select "SET logbook"
    > "Standard trip".
  5. Select the desired trip type.

Editing data from the current trip

You can change the different pieces of data registered by the logbook during recording of a trip as many times as you want during the trip.

Changing the trip type

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Logbook"
    > "Current trip".
  4. Select the desired trip type.

Changing the driver

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Logbook"
    > "Current trip"
    > "Edit trip"
    > "Driver".
    A list of all the drivers created so far is opened.
    If a driver has been assigned a specific key, this is also shown in the list.
  4. Insert the desired driver by selecting.

Creating a new driver

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Logbook"
    > "Current trip"
    > "Edit trip"
    > "Driver"
    > "New driver".
    The input menu is opened.
  4. Enter the name of the new driver and confirm by selecting "OK".

If the current trip is a Work trip or Private trip rather than a Business trip, the only fields available to you are "Driver" and "Remarks".

Changing the trip destination

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "Logbook"
    > "Current trip"
    > "Edit trip"
    > "Trip destination".
    A list of all the destinations created so far is opened.
  4. Insert the trip desired destination by selecting it.